E-flite has captured the spirit of the Flying Tigers in this almost-ready-to-fly re-creation of the P-40 that goes together fast and is small enough to fly in a park. The P-40 Warhawk 300 ARF comes out of the box loaded with scale details like an authentic Flying Tigers paint scheme and molded panel lines. This ARF also comes equipped with a factory-installed E-flite 300 BL outrunner motor that will provide plenty of power for warbird aerobatics like loops, rolls and Immelmans. Its simple 3-channel control setup means you only need to buy two servos - one for aileron and one for elevator - making it even more affordable to get flying. When you're not flying, you can show off its scale looks with the included static display stand. To get the P-40 Warhawk 300 ARF airborne, you will need a 4-channel radio system with 2 micro servos, micro receiver, 10-Amp ESC, and a lipo battery/charger (see required components).
Molded foam construction with panel lines and other scale details
Factory-applied Flying Tigers
shark
mouth
paint
scheme"
Factory-installed 300 BL outrunner motor with propeller
Factory-installed empennage, control horns and servo links
Simple aileron/elevator controls require just two servos
Quick release wing attachment
Magnetically secured canopy hatch
Extra prop and spinner included
Quick, easy assembly
Attractive display stand included
Wingspan: 25.6 in
Overall Length: 21.7 in
Wing Area: 108 sq in
Flying Weight: Without battery: 5.5–6.0 oz, with battery: 6.5–7.0 oz
Motor Size: 300 Brushless (Included)
Radio: 4+ channels
Servos: E-flite S-60
CG (center of gravity): 1 1/8 to 1 1/4 inches (28–35mm) back from the leading edge
Spinner Size: (Included)
Hardware Included: (Yes)
Speed Control : E-flite 10-amp brushless
Control Throw (Ailerons): HIGH: Up & Down 5/16-inch (8mm), LOW: Up & Down 1/2-inch (6mm)
Control Throw (Elevator): HIGH: Up & Down 3/16-inch (5mm), LOW: Up & Down 5/32-inch (4mm)
