E-flite’s 5-Amp Pro Brushless ESC was designed for use in RC airplanes and that require continuous currents of up to 5 amps when using 2 Li-Po battery packs and up to four sub-micro servos. This ESC boasts such features as: advance BEC and safe power arming, programmable features such as low voltage cutoff, braking, timing and throttle input range.
Up to 5 amps continuous current with proper air flow
Drives up to 4 sub-micro servos on 2S
Programmable motor braking
Safe power-arm mode prevents accidental starts
Programmable low voltage cutoff with settings for 2-cell Li-Po or 74% of battery starting voltage
Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
Soft start
Auto motor shut down if signal is lost or there is interference
Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
Pre-wired connectors—JST on battery input and 2mm female gold bullets on motor output leads
Brake: Yes - Programmable
Continuous Maximum Current: 5A
Momentary Peak Current: 6A (15 sec)
Dimensions (WxLxH): 17mm (.67 in) x 25mm (1 in) x 7mm (.27 in)
Weight: 8 g (.28 oz)
Wire Gauge: 22 AWG with JST connector on battery input leads or 22 AWG with 2mm female gold bullet connectors on motor output leads
